Numerical simulation of thin sheet metal parts manufacturing process using metal forming

Simulation of surface wear using Finite Element Analysis for components contact

Using Cycle Jump Method for the simulation of shakedown and ratcheting

Using Cycle Jump Method for the assessment of fretting fatigue damage

Study on the effect of weld defects on fatigue life of structures

Simulation of residual stresses in Additive Manufacturing process

Simulation of fatigue crack propagation using SMART crack growth technique

Hydraulic design of Y junctions for minimum pressure loss

Food protecting Food: Nature’s Way - TM0003

Wind Turbine Cooling System Assessment – Debris Detection and System Re-qualification - TM0002

Wind Turbine Connecting Rod – Materials of Construction and Failure Assessment - TM0001

Investigation of the compressive residual stress methods for improved fatigue life

Cold Forming of Structures

Finite and Discrete Element Methods for Structural Analysis

Ground Engaging Tools (GET) Design

Fracture mechanics analysis of metallic materials

Giga-Cycle Fatigue Testing of Materials

Assessment of the role of storage in future District Scale energy systems

ALTERNATIVE REFRIGERANT INVESTIGATION

DESIGN AND ANALYSIS OF INTEGRATED THERMAL STORAGE

4/5TH GENERATION DISTRICT HEATING

MITIGATING THE IMPACT OF ELECTRIC VEHICLES ON ENERGY NETWORKS

SEASONAL THERMAL STORAGE

HIGH RESOLUTION SOLAR RADIATION DATA

REDUCING HEATING AND AIR CONDITIONING LOADS IN ELECTRIC VEHICLES

Assessing the impact of degradation on the energy resilience of buildings - NK0001

Satellite Digital Twin

OrbitGPT - MV0004

Re-entry Detector as Secondary Paylod for STRATHcube - MV0003

Multi-layer Temporal Network Model of the Space Environment - MV0002

Numerical simulation of shear-thinning fluid flows through convergent-divergent geometries

Numerical simulation of flow through a microfluidic flow focusing device for microfibre manufacture

Fluid-solid particle mixtures in vibrated shallow enclosures in normal gravity conditions. - ML0006

Fluid-solid particle mixtures in corner heated cubic cavities in microgravity conditions. - ML0005

Fluid-particle systems encapsulated in triangular, tetrahedral and octahedral cavities in microgravity - ML0004

Simulation of the fluid-structure interaction of a high-aspect ratio wing in transonic regimes

Characterisation of nonequilibrium shock interference patterns transition over canonical shapes

Spatio-temporal identification and collocation of vortex breakdown using Reduced Basis Methods

Numerical study of laminar and turbulent gas-surface aerodynamic interaction using anisotropic mesh adaptation

Spatio-Temporal Identification And Collocation Of Vortex Breakdown Using Reduced Basis Methods

Numerical study of the aerodynamic performance of Martian aerobots

Anisotropic Mesh Adaptation in the Discretisation of Boundary Layer and Wake Flow Fields

Investigating Neural Networks as a Method for Predicting Lift and Drag Coefficient of an Aerofoil

Simulation of the Fluid-Structure Interaction of High-Aspect Ratio Wing in Transonic Regimes

Design investigation to hybridise the most optimal characteristics of the Triumph and Honda parallel twin motorcycle engines.

Numerical study of the aerodynamic performance of martian aerobots

Analysis of staged space tethers for performance optimisation.

Analysis and design of a controllable suspension for vibration isolation, with extended negative to positive stiffness characteristics.

Design of a highly controllable vibration isolator for precision instrumentation.

Addessing the potential hazardous impact of small solar system bodies with Earth

Addessing the potential hazardous impact of small solar system bodies with Earth

Coverage analysis of Low Earth Orbit Starlink Constellations

Autonomous orbit determination for spacecraft orbiting an asteroid

Trajectory design and analysis for an asteroid lander

Resonance capture and escape of a low-thrust spacecraft around asteroids

AI-based Multi-sensor Data Fusion for Space Navigation - JF0001

Design and prototyping of an electric autonomous rover for transportation in agricultural steep terrain

Design and construction of drone based system for the treatment of pine/oak processionary pest

Design of a small scale free piston Stirling engine solar concentration system

Design of a Smart Home Composter

The use of free satellite data for the management and development of forests in Scotland

Intelligent Control for Access to Space

Atmospheric Water Harvesting: Low-Cost Solutions for Arid Zones

CFD based optimisation of 2D shapes.

Effect of the solid surface topology on minimising the slip of soft gels

Low fidelity models for aerodynamic and aeroacoustic performance prediction of aeronautical propellers

Develop a Lattice-Boltzmann approach for numerical simulation of viscoplastic fluid flows

Sedimentation mechanism of particles in yield-stress fluids

Mechanics of tailings pond management: computational fluid dynamics & plasticity theories

Sizing and selection of hydrualic actuators for industrial manipulators

Development of a tunable PID controller and 2-link manipulator arm

Direct evaporative cooling in building components

Non-intrusive evaluation of thermal properties in existing buildings

Heat and mass transfer between human body and environment

Machine learning for aerodynamic surrogate modelling

Cooling in dry climates using downdraught cooling towers

Visualisation tool for launch vehicle trajectory optimisation

Dynamic modelling and control of a launch system

Development of Python Code to quantify macrozones in titanium compressor disc alloy Ti834 using electron back scattered data

Development of Finite Element Model for open die forging in the Futureforge facility

Development of Finite Element Model for isothermal forging in the Futureforge facility

Development of Finite Element Model for closed die forging in the Futureforge facility

Effect of Tool Offset on Simulated Friction Stir Welding of Aluminium and Polymer

Computational analysis of the friction stir welding process

Modelling of dissimilar material Friction Stir Spot Welding