-
Numerical Modeling and Analysis of Friction Stir Welding ProcessAlexander Galloway
-
Manipulating The Microstructure And Mechanical Properties Of Aisi 4340 Steel Via Heat TreatmentAlexander Galloway
-
Comparator of material selection, geometrical aspects and performance study of two automotive brake discs of different valueAlexander Galloway
-
Structural Optimisation of Boeing 737 Fuselage Via Isogrid GeometryAlexander Galloway
-
Defence Standardisation: Project sponsored by the Ministry of Defence (MOD)Andrew MclarenMechanical Engineering Aerospace Engineering Aero-Mechanical or Aerospace Analysis Research
-
Identifying acceptance criteria within NDT Defence Standards for implementation within relevant BS EN ISO standardsAndrew MclarenAnalysis Research
-
Development Of An Evidence-Based Procedure For Calibrating 3D Scanners For Measuring Back Face Deformation Of Body Armour And Calculation Of The Associated Measurement UncertaintyAndrew MclarenAnalysis Research
-
A Comparative Assessment of a UK Defence Standard and NATO STANAG regarding the Fording and Flotation of Military VehiclesAndrew MclarenAnalysis Research
-
An audit on DStan using the BS202000- Standardisation Management System StandardAndrew MclarenAnalysis Research
-
Assessment of the effect of damage on the strength of climbing carabinersAndrew MclarenMechanical Engineering Health & Wellbeing Materials Hardware Practical Measurement Analysis
-
Satellite Data for Sustainable DevelopmentAnnalisa RiccardiImage & Video Processing Data Analysis Data Analytics Sustainable Systems Deep Learning Signal Processing Energy Systems Aero-Mechanical or Aerospace Machine and Deep Learning Computer-based Measurement Analysis Small signal Programming
-
Modelling of dissimilar material Friction Stir Spot WeldingAthanasios ToumpisMechanical Engineering Materials Computer-based Modelling Numerical Simulation Analysis
-
Computational analysis of the friction stir welding processAthanasios ToumpisMechanical Engineering Materials Computer-based Modelling Numerical Simulation Analysis Research
-
Investigation of corrosive wear properties of alternative surface engineering treatments to replace hard chromium platingAthanasios ToumpisMechanical Engineering Materials Practical Experimental Measurement Research
-
Evaluation of surface engineering treatments for plunger components used in the oil and gas industryAthanasios ToumpisMechanical Engineering Materials Practical Experimental Measurement Research
-
An investigation of friction stir welding, friction stir processing and related technologiesAthanasios ToumpisMechanical Engineering Materials Analysis Research Dissertation
-
Effect of Tool Offset on Simulated Friction Stir Welding of Aluminium and PolymerBilal AhmadTool Offset Friction Stir Welding Aluminium Polymer Welding Quality Simulation Material Integrity Abaqus FEA Numerical modelling
-
Impact of Lightning on the Thermal and Mechanical Properties of CFRPs and Its Mitigations for Aerospace ApplicationsBilal AhmadCFRPs Lightning Impact Aerospace Engineering Thermal Properties Mechanical Properties Nnumerical modelling Ansys Workbench FEA
-
Design and Thermal Analysis Investigation of an Automotive Disc BrakeBilal AhmadAutomotive Engineering Disc Brake Design Thermal Analysis Brake Performance Heat Distribution Safety Engineering Design Ansys Workbench Numerical analysis FEA
-
Effect of backing plate in a friction stir weld on high density polyethyleneBilal AhmadBacking Plate Friction Stir Welding High-Density Polyethylene Welding Quality Material Properties Process Optimisation FEA Numerical analysis Abaqus
-
Microstructure Analysis of Advanced Aerospace Titanium AlloysBradley WynneImage & Video Processing Aerospace Engineering Data Analysis Aero-Mechanical or Aerospace Materials Practical Measurement Analysis Research
-
Development of Finite Element Model for closed die forging in the Futureforge facilityBradley WynneModelling Simulation Materials
-
Development of Finite Element Model for isothermal forging in the Futureforge facilityBradley WynneModelling Simulation Materials
-
Can we quantify microstructure using forces measured during machining?Bradley WynneData Analysis Image and Video Processing Programming Materials
-
Can UK manufacturing go net-zero? CFD modelling of hydrogen fired furnaces for metals manufacturingBradley WynneMechanical Engineering Renewables Data Analysis Energy Markets Sustainable Systems Clean Energy Energy Systems Materials Modelling Numerical
-
Rotary Friction Welding (RFW) modelling – control of internal flash formation in steel tubesBradley WynneMechanical Engineering Optimisation Aero-Mechanical or Aerospace Materials Software Practical Modelling Analysis
-
Data Management for the Operation of Digital TwinsBradley WynneSoftware Systems Data Analysis Signal Processing Computer Science Materials Software Analysis Programming
-
Residual stress and microstructure characterisation of dissimilar titanium Rotary Friction Welding (RFW) weldsBradley WynneMechanical Engineering Aerospace Engineering Aero-Mechanical or Aerospace Materials Modelling Measurement Analysis
-
Advanced metal forming techniques for future aerospace and automobile applicationsBradley WynneMechanical Engineering Machines Aero-Mechanical or Aerospace Materials Practical Experimental Measurement Research
-
Development of Python Code to Reconstruct High Temperature Titanium Microstructures using room temperature electron back scattered dataBradley WynneProgramming Materials
-
Development of Finite Element Model for open die forging in the Futureforge facilityBradley WynneModelling Simulation Materials
-
Development of Python Code to quantify macrozones in titanium compressor disc alloy Ti834 using electron back scattered dataBradley WynneModelling Simulation Materials
-
Investigating the Flexural Rigidity contribution of Carbon Fibre Sandwich CoresChris CameronMaterials Analysis Research Experimental Measurements Practical
-
An Investigation of The Effect of Core Thickness on The Flexural Stiffness of Foam Core Sandwich PlatesChris CameronMaterials Analysis Research Experimental Measurements Practical
-
Tidal energy architecture and influence on power extractionCameron JohnstoneComputer-Based Modelling Numerical Design Analysis Research Control Machines Energy Systems Electrical Machines Power Systems Renewables
-
Hybrid Automotive Drive-trainsCameron JohnstonePractical Experimental Numerical Design Analysis Research Machines Electrical Technologies Energy Systems Electrical Machines Power Systems
-
Low and Zero Emission Vehicles (L-ZEVs)Cameron JohnstonePractical Modelling Experimental Numerical Measurement Design Construction Analysis Research Electrical Technologies Energy Systems Smart Grids Electrical Machines
-
Seawater Reverse Osmosis Desalination Powered by Hybrid Renewable Energy SystemsCameron Johnstone
-
Analysis of the Transition from Internal Combustion Powered Vehicles to Electric Powered Vehicles and the Maintenance of FunctionalityCameron Johnstone
-
Modelling & Simulation Of A Hybrid-Electric Tractor To Reduce Agricultural Carbon EmissionsCameron Johnstone
-
The Simulation and Control of a Fixed Wing UAV Carrying out LIDARChristie Maddock
-
Upper Stage Trajectory Design and Optimisation of Coplanar Continuous Thrust Orbit TransfersChristie Maddock
-
Dynamic modelling and control of a launch systemChristie MaddockSoftware Computer-Based Modelling Numerical Simulation Analysis Programming Control Space Technology Systems Engineering Control Theory Control Systems
-
Visualisation tool for launch vehicle trajectory optimisationChristie MaddockSoftware Computer-Based Modelling Simulation Programming Software Systems Space Technology Systems Engineering
-
Cooling in dry climates using downdraught cooling towersDaniel CostolaComputer-Based Modelling Simulation Programming Energy Systems
-
Uncertainty quantification of global static atmospheric modelsChristie MaddockComputer-Based Modelling Measurement Analysis Programming Space Technology
-
Machine learning for aerodynamic surrogate modellingChristie MaddockAerospace Engineering Machine Learning Data Analysis Data Analytics Space Technology Systems Engineering Intelligent Systems Computer Science Aero-Mechanical or Aerospace Software Computer-based Modelling Numerical Simulation Analysis Programming
-
Heat and mass transfer between human body and environmentDaniel CostolaComputer-Based Theoretical Simulation Analysis Research Programming Signal Processing Energy Systems
-
Non-intrusive evaluation of thermal properties in existing buildingsDaniel CostolaSoftware Computer-Based Modelling Numerical Simulation Analysis Signal Processing Energy Systems Software Systems
-
Direct evaporative cooling in building componentsDaniel CostolaComputer-Based Modelling Numerical Design Simulation Research Programming Energy Systems
-
A Parametic Analysis Of Evaporative Cooling Techniques For Applications In The Middle EastDaniel Costola
-
Thermal Analysis Simulations based on a 21700 Battery PackDaniel Costola
-
Transient thermal model of a vehicle's cabinDaniel CostolaSoftware Computer-based Modelling Numerical Design Analysis Programming
-
Development of a tunable PID controller and 2-link manipulator armDaniel JohnstonDynamics & Control Simulation Mechanical Engineering Modelling
-
Sizing and selection of hydrualic actuators for industrial manipulatorsDaniel JohnstonDynamics Mechanics Simulation Mechanical Engineering Hydraulics Design Modelling
-
Finite Element Analysis for Level 3 Fitness for Service Assessment using Elastic Perfect-Plastic, Elastic Bilinear-Plastic, and Multilinear-Plastic material modelsDonald MackenzieComputer-Based Modelling Analysis
-
Assessment of Global and Local Ductile Failure in Pressure Vessel DesignDonald MackenzieComputer-Based Modelling Design Analysis Programming
-
Critical Analysis of the Challenger Space Shuttle DisasterDonald MackenzieComputer-Based Modelling Analysis Materials
-
A Finite Element Analysis and Fracture Mechanics Study of the Damage Tolerant Capacity of a Flawed Aircraft Fuselage Subject to Internal PressurisationDonald MackenzieComputer-Based Modelling Analysis
-
Investigating the critical crack length of a structural component from a helicopter using advanced fracture tools in ANSYS WorkbenchDonald MackenzieComputer-Based Modelling Analysis
-
Elastic-Plastic Finite Element Analysis for Level 3 Fitness for Service assessmentDonald MackenzieComputer-Based Modelling Numerical Design Analysis Programming
-
Design by Analysis of a Pressure Vessel Nozzle under combined Pressure and Thermal LoadingDonald MackenzieComputer-Based Modelling Design Analysis
-
Assessment of Stress Linearization procedures for Pressure Vessel Design by AnalysisDonald MackenzieComputer-Based Modelling Numerical Design Analysis Programming
-
Elastic-Plastic Buckling of Externally Pressurised Cylinders in Forming ProcessesDonald MackenzieComputer-Based Modelling Analysis
-
Crack Defect Tolerance in High Pressure Piping ComponentsDonald MackenzieComputer-Based Modelling Analysis
-
Understanding the wear characteristics of bearing surface materials for oil and gas equipment under harsh service conditions - DN0001David NashMechanics Materials Experimental Data Processing Safety
-
Finite Element Optimisation of a Bioresorbable Stent Graft for use in Lower Limb Peripheral Arterial Disease (PAD) PreventionDavid NashMechanical Engineering Medical Technologies Materials Computer-based Modelling Numerical Design Analysis Research
-
Finite Element Analysis of 'Hot Bolting' of Pressure Vessel Flanged JointsDavid NashMechanical Engineering Materials Computer-based Modelling Numerical Design Analysis Research
-
Mechanics of tailings pond management: computational fluid dynamics & plasticity theoriesEmad ChaparianMechanical Engineering Computer-based Numerical Theoretical Simulation Analysis Research Programming
-
Suspensions of particles/bubbles in yield-stress fluidsEmad ChaparianMechanical Engineering Computer-based Numerical Theoretical Research
-
Sedimentation mechanism of particles in yield-stress fluidsEmad ChaparianMechanical Engineering Computer-based Numerical Theoretical Simulation Research
-
Develop a Lattice-Boltzmann approach for numerical simulation of viscoplastic fluid flowsEmad ChaparianMechanical Engineering Computer-based Numerical Simulation Research Programming
-
Low fidelity models for aerodynamic and aeroacoustic performance prediction of aeronautical propellersEdmondo MinisciAerospace Engineering Mechanical Engineering Aero-Mechanical or Aerospace Software Practical Computer-based Modelling Numerical Design Simulation Analysis Programming
-
Effect of the solid surface topology on minimising the slip of soft gelsEmad ChaparianMechanical Engineering Computer-based Modelling Numerical Simulation Programming
-
CFD based optimisation of 2D shapes.Edmondo MinisciComputer-Based Modelling Numerical Design Simulation Optimisation Machine Learning
-
Engineering optimisation and quantum computingEdmondo MinisciOptimisation Programming Quantum computing Mathematics Algorithms Mechanical Engineering Aerospace Engineering
-
Symbolic regression for engineering designEdmondo MinisciMathematics Analysis Dynamics Programming Design Optimisation Mechanical Engineering Aerospace Engineering
-
Atmospheric Water Harvesting: Low-Cost Solutions for Arid ZonesEdmondo MinisciThermo-Fluids CAE-Design Engineering Analysis Analysis Measurement Modelling Numerical Simulation Sustainable Agriculture Sustainability Water Harvesting Water Management
-
Physics-Informed Machine Learning for Aerospace Systems Analysis and DesignEdmondo MinisciPhysics-Informed Machine Learning Machine Learning Optimisation Aerospace Systems Design High-Fidelity Modelling Multi-Fidelity Modelling Data-Driven Engineering Design Optimisation
-
Transfer Learning for Aerospace Systems Analysis and DesignEdmondo MinisciTransfer Learning Machine Learning Data-Driven Engineering Design Optimisation Aerospace Systems Design
-
Multi-Fidelity Modelling Using Gaussian Process for Aerospace Systems Analysis and DesignEdmondo MinisciMulti-Fidelity Modelling Gaussian Process Modelling Aerospace Systems Design Machine Learning Data-Driven Engineering Design Optimisation Uncertainty Quantification
-
Feasibility Study of Repurposing Decommissioned Wind Turbine BladesEdmondo MinisciWind Turbine Blade Repurposing Mechanical Design Sustainability Circular Economy Optimisation
-
Genetic Programming with Adjoint State Method for Control System Design in Aerospace TransportationEdmondo MinisciGenetic Programming Adjoint State Method Control System Design Aerospace Transportation Systems Trajectory Optimisation Attitude Control Interpretable AI Optimisation
-
Design of a Container Roof Garden for Plants and Small AnimalsEdmondo MinisciSustainable Design Green Building Structural Engineering Prototype Development Sustainable development Agritech
-
Symbolic regression via genetic programmingEdmondo MinisciSoftware Computer-Based Modelling Numerical Design Analysis Programming Computer Science Machine Learning Data Analysis
-
Intelligent Control for Access to SpaceEdmondo MinisciComputer-Based Modelling Design Simulation Analysis Programming Computer Science Sensor Systems Software Systems Machine Learning Data Analysis
-
Remote sensing for precision agricultureEdmondo MinisciImage & Video Processing Aerospace Engineering Machine Learning Data Analysis Data Analytics Intelligent Systems AI Deep Learning Aero-Mechanical or Aerospace Machine and Deep Learning Software Computer-based Modelling Numerical Analysis Programming
-
The use of free satellite data for the management and development of forests in ScotlandEdmondo MinisciAerospace Engineering Machine Learning Data Analysis Sustainable Systems Deep Learning Signal Processing Computer Science Aero-Mechanical or Aerospace Machine and Deep Learning Software Computer-based Modelling Numerical Simulation Analysis Programming
-
Design of a Smart Home ComposterEdmondo MinisciMachine Learning Data Analysis Sustainable Systems Control Mechanical Engineering Materials Machine & Deep Learning Hardware Practical Computer-based Modelling Experimental Numerical Measurement Design Simulation Construction Analysis Research Programming Waste Management
-
Design of a small scale free piston Stirling engine solar concentration systemEdmondo MinisciElectrical Machines Renewables Sustainable Systems Clean Energy Energy Systems Mechanical Engineering Software Practical Computer-based Modelling Numerical Design Simulation Analysis Programming
-
Design and construction of drone based system for the treatment of pine/oak processionary pestEdmondo MinisciSensor Systems Robotic Systems Mechanical Engineering Aerospace Engineering Systems Engineering Control Theory Control Systems Control Aero-Mechanical or Aerospace Robotics Hardware Software Practical Computer-based Modelling Experimental Numerical Design Simulation Construction Analysis Programming
-
Design and prototyping of an electric autonomous rover for transportation in agricultural steep terrainEdmondo MinisciSensor Systems Robotic Systems Mechanical Engineering Machine Learning Data Analysis Intelligent Systems Control Systems Deep Learning Electric Vehicles Control Machines Electrical Technologies Computer Science Aero-Mechanical or Aerospace Robotics Machine & Deep Learning Hardware Software Practical Computer-based Modelling Experimental Numerical Measurement Design Simulation Construction Research Programming
-
Fracture Toughness Assessment of Advanced Engineering Alloys for Industrial ApplicationFiona SillarsMaterials Analysis Research Experimental Measurements Practical Design Data Analysis
-
Effect of Notch Machining on Fracture Toughness of SteelFiona SillarsMaterials Analysis Research Experimental Measurements Practical Design Data Analysis
-
Investigation of the Residual Stress and Microstructure of Wire Plus Arc Additive Manufactured Components Using F22 SteelFiona SillarsMaterials Analysis Research Experimental Measurements Practical Design Data Analysis
-
A mechanical alternative to grout for offshore wind turbine foundationsFiona SillarsWind Energy Mechanical Engineering Renewables Fabrication Energy Markets Sustainable Systems Clean Energy Energy Systems Materials Practical Experimental Measurement Design Analysis Research
-
Battery recycling – developing solutions for the recovery of minerals and materials of constructionFiona SillarsSustainable Systems Clean Energy Practical Experimental Measurement Construction Analysis Research Dissertation
-
AI-based Multi-sensor Data Fusion for Space Navigation - JF0001Jinglang FengAerospace Dynamics & Control Engineering Analysis Analysis Computer-Based Design Measurement Modelling Numerical Programming Simulation AI
-
Resonance capture and escape of a low-thrust spacecraft around asteroidsJinglang FengMechanical Engineering Aerospace Engineering Control Theory Aero-Mechanical or Aerospace Modelling Numerical Theoretical Simulation Analysis Programming
-
Trajectory design and analysis for an asteroid landerJinglang FengMechanical Engineering Aerospace Engineering Space Technology Systems Engineering Control Aero-Mechanical or Aerospace Modelling Numerical Simulation Analysis Programming
-
Autonomous orbit determination for spacecraft orbiting an asteroidJinglang FengMechanical Engineering Aerospace Engineering Space Technology Systems Engineering Aero-Mechanical or Aerospace Modelling Numerical Simulation Analysis Programming
-
Survey of Artifical Intelligence (AI) to assist space mission design to small bodiesJinglang FengAerospace Engineering AI Aero-Mechanical or Aerospace Machine and Deep Learning Design Analysis
-
Coverage analysis of Low Earth Orbit Starlink ConstellationsJinglang FengAerospace Engineering Space Technology Systems Engineering Mechanical Engineering Aero-Mechanical or Aerospace Modelling Numerical Simulation Analysis
-
Addessing the potential hazardous impact of small solar system bodies with EarthJinglang FengMechanical Engineering Aerospace Engineering Space Technology Aero-Mechanical or Aerospace Modelling Numerical Simulation Analysis Research Programming
-
Addessing the potential hazardous impact of small solar system bodies with EarthJinglang FengMechanical Engineering Aerospace Engineering Space Technology Aero-Mechanical or Aerospace Modelling Numerical Simulation Analysis Research Programming
-
Survey on the application of Artificial Intelligence in Space Mission DesignJinglang FengSpace Machine Learning
-
Design of a highly controllable vibration isolator for precision instrumentation.Matthew CartmellSensor Systems Mechanical Engineering Aerospace Engineering Micro-controller Systems Machines Aero-Mechanical or Aerospace Modelling Theoretical Design Simulation Analysis Research
-
Analysis and design of a controllable suspension for vibration isolation, with extended negative to positive stiffness characteristics.Matthew CartmellMechanical Engineering Aerospace Engineering MEMS Control Machines Aero-Mechanical or Aerospace Modelling Numerical Design Simulation Analysis Research Programming
-
Analysis of staged space tethers for performance optimisation.Matthew CartmellMechanical Engineering Aerospace Engineering Space Technology Machines Electrical Technologies Energy Systems Aero-Mechanical or Aerospace Materials Computer-based Modelling Numerical Theoretical Design Simulation Analysis Research Programming
-
Numerical study of the aerodynamic performance of martian aerobotsMarco FossatiModelling Numerical Simulation Analysis Research Programming Computer-Based Aerodynamics
-
Design investigation to hybridise the most optimal characteristics of the Triumph and Honda parallel twin motorcycle engines.Matthew CartmellMechanical Engineering Machines Materials Modelling Design Simulation Analysis Research
-
Simulation of the Fluid-Structure Interaction of High-Aspect Ratio Wing in Transonic RegimesMarco FossatiAerodynamics Simulation Computer-Based Aeroelasticity Programming Numerical
-
Investigating Neural Networks as a Method for Predicting Lift and Drag Coefficient of an AerofoilMarco FossatiAerodynamics Simulation Computer-Based Programming Numerical Data Analysis Machine Learning
-
Anisotropic Mesh Adaptation in the Discretisation of Boundary Layer and Wake Flow FieldsMarco FossatiAerodynamics Simulation Computer-Based Programming Numerical
-
Numerical study of the aerodynamic performance of Martian aerobotsMarco FossatiAerodynamics Simulation Computer-Based Aeroelasticity Programming Numerical
-
Spatio-Temporal Identification And Collocation Of Vortex Breakdown Using Reduced Basis MethodsMarco FossatiAerodynamics Simulation Computer-Based Aeroelasticity Programming Numerical
-
Numerical study of laminar and turbulent gas-surface aerodynamic interaction using anisotropic mesh adaptationMarco FossatiModelling Numerical Simulation Analysis Research Programming Computer-Based Aerodynamics
-
Spatio-temporal identification and collocation of vortex breakdown using Reduced Basis MethodsMarco FossatiModelling Numerical Simulation Analysis Research Programming Computer-Based Aerodynamics
-
Characterisation of nonequilibrium shock interference patterns transition over canonical shapesMarco FossatiModelling Numerical Simulation Analysis Research Programming Computer-Based Aerodynamics
-
Simulation of the fluid-structure interaction of a high-aspect ratio wing in transonic regimesMarco FossatiModelling Numerical Simulation Analysis Research Programming Computer-Based Aerodynamics Aeroelasticity
-
Experimental Investigation of the Response of Lunar Regolith Simulants of Different Particle Size Distributions to Vertical Vibrations - ML0001Marcello LappaAerospace Thermofluids Mechanics Dynamics & Control Engineering Analysis Materials Analysis Experimental Hardware Measurement Theoretical Modelling Vibro-fluidization of Granular Materials
-
Experimental Investigation of the Dynamic Response of Lunar Regolith Simulants to Vertical Vibrations in a 3D Container - ML0002Marcello LappaAerospace Thermo- Fluids Mechanics Dynamics & Control Engineering Analysis Materials Analysis Experimental Hardware Measurement Theoretical Modelling Vibro-fluidization of Granular Materials
-
Experimental Investigation of the Dynamic Response of Lunar Regolith Simulants to Horizontal Vibrations - ML0003Marcello LappaAerospace Thermofluids Mechanics Dynamics & Control Engineering Analysis Materials Analysis Experimental Hardware Measurement Theoretical Modelling Vibro-fluidization of Granular Materials
-
Fluid-particle systems encapsulated in triangular, tetrahedral and octahedral cavities in microgravity - ML0004Marcello LappaAerospace Thermo-Fluids CAE-Design Engineering Analysis Analysis Computer-Based Measurement Modelling Numerical Programming Simulation Software Theoretical Thermo-Vibrational Convection Rayleigh-Bernard Convection Hadley Flows Microgravity-Research Aerospace Engineering Systems and Applications
-
Fluid-solid particle mixtures in corner heated cubic cavities in microgravity conditions. - ML0005Marcello LappaAerospace Thermo-Fluids CAE-Design Engineering Analysis Analysis Computer-Based Measurement Modelling Numerical Programming Simulation Software Theoretical Thermo-Vibrational Convection Rayleigh-Bernard Convection Hadley Flows Microgravity-Research Aerospace Engineering Systems and Applications
-
Fluid-solid particle mixtures in vibrated shallow enclosures in normal gravity conditions. - ML0006Marcello LappaAerospace Thermo-Fluids CAE-Design Engineering Analysis Analysis Computer-Based Measurement Modelling Numerical Programming Simulation Software Theoretical Thermo-Vibrational Convection Rayleigh-Bernard Convection Hadley Flows Microgravity-Research Aerospace Engineering Systems and Applications
-
Characterisation of slurries of lunar/martian regolith simulants for potential space applications as concrete-like materials - MO0001Monica OliveiraAerospace Thermo-Fluids Materials Analysis Experimental Measurement Complex fluids Rheology
-
Characterisation of polymers used in the biomedical industry (industrial project)Monica OliveiraMedical Technologies Mechanical Engineering Materials Practical Experimental Measurement Research
-
Design and manufacture of a fabric handling rig for biodevice manufacturing and testing - MO0002Monica OliveiraCAED-Design Construction Design Hardware Biomedical engineering Industrial Project
-
Design and manufacture a rig for testing polymer durability under flow conditions - MO0003Monica OliveiraCAED Design Thermo-Fluids Construction Design Hardware Biomedical engineering Industrial Project
-
Design and testing of a visualisation accessory for a rotational rheometerMonica OliveiraOpto Electronics Mechanical Engineering Experimental Measurement Design Construction
-
Numerical characterisation of extensional flow trough a microfluidic cross-slot deviceMonica OliveiraMechanical Engineering Computer-based Modelling Numerical Analysis Research
-
Numerical simulation of flow through a microfluidic flow focusing device for microfibre manufactureMonica OliveiraMechanical Engineering Computer-based Numerical Simulation Analysis
-
Numerical simulation of shear-thinning fluid flows through convergent-divergent geometriesMonica OliveiraMechanical Engineering Computer-based Modelling Numerical Simulation Analysis
-
Characterisation of Ophthalmic Viscosurgical Devices (OVD) used in Cataract SurgeryMonica OliveiraMechanical Engineering Practical Experimental Measurement Research
-
3D printing for microfluidic device manufactureMonica OliveiraFabrication Medical Technologies Micro-Fluidic Devices Mechanical Engineering Practical Experimental Design
-
CFD modelling of the erosion-corrosion of steelMargaret StackComputer-Based Modelling Materials
-
Bio-tribo-corrosion mapping of artificial jointsMargaret StackModelling Experimental Materials
-
Micro-abrasion of dental materials in artificially generated salivaMargaret StackPractical Experimental Materials
-
Mapping liquid impact of materials in laboratory simulated wind turbine conditions.Margaret StackPractical Experimental Materials
-
Erosion-corrosion of Carbon Nanotube materialsMargaret StackPractical Measurement Materials
-
Creating a probability model for the prediction of the number of impacts by raindrops and or hailMargaret StackMarine Systems Clean Energy Energy Systems Materials Modelling Design
-
Development of a geospatial model to predict damage on wind turbine bladesMargaret StackModelling Materials
-
Semi-analytical coupled attitude-orbit propagation - MV0001Massimiliano VasileAerospace Dynamics & Control Computer-Based Theoretical Numerical Programming Astrodynamics
-
Re-entry Analysis of STRATHcubeMassimiliano VasileAerospace Engineering Experimental Design Analysis
-
Multi-layer Temporal Network Model of the Space Environment - MV0002Massimiliano VasileAerospace Computer-Based Theoretical Numerical Simulation Astrodynamics Space Debris Space Sustainability
-
Re-entry Detector as Secondary Paylod for STRATHcube - MV0003Massimiliano VasileAerospace Design Modelling Simulation Astrodynamics Space System Engineering
-
OrbitGPT - MV0004Massimiliano VasileAerospace Numerical Programming Simulation Theoretical Computer-Based Astrodynamics AI
-
Evidence-based Systems EngineeringMassimiliano VasileSoftware Computer-Based Modelling Numerical Programming Computer Science Space Technology Systems Engineering
-
NEOCORE - a new concept of asteroid explorationMassimiliano VasileDesign Analysis Research Space Technology Optimisation Systems Engineering
-
Mars Robotic SurveyMassimiliano VasileRobotic Systems Aerospace Engineering Mechanical Engineering Aero-Mechanical or Aerospace Robotics Computer-based Numerical Design Analysis
-
Satellite Digital TwinMassimiliano VasileMechanical Engineering Aerospace Engineering Systems Engineering Electrical Technologies Computer Science Aero-Mechanical or Aerospace Computer-based Modelling Numerical Design Simulation Analysis Programming
-
Eco-design of Complex Engineering SystemsMassimiliano VasileMechanical Engineering Aerospace Engineering AI Computer Science Aero-Mechanical or Aerospace Machine and Deep Learning Computer-based Modelling Numerical Design Analysis Programming
-
Assessing the impact of degradation on the energy resilience of buildings - NK0001Nicolas KellyEnergy systems CAED Materials Analysis Design Computer Based Modelling Simulation Software Programming Building Performance Simulation Net Zero Climate Change Energy Efficiency Renewable Energy
-
BIO-INSPIRED DEFROSTING OF HEAT PUMPSNicolas KellyExperimental Built environment Decarbonised heat Surface treatment Vibrations Renewables
-
Sensing of indoor/outdoor environmental conditions using unconventional means - NK0002Nicolas KellyEnergy systems Measurement Numerical Programming Experimental Artificial Environments Health and Wellbeing Energy Environmental Systems
-
REDUCING HEATING AND AIR CONDITIONING LOADS IN ELECTRIC VEHICLESNicolas KellyComputer-Based Modelling Design Simulation Analysis Research Electrical Technologies Energy Systems Smart Grids Renewables
-
HIGH RESOLUTION SOLAR RADIATION DATANicolas KellySoftware Computer-Based Modelling Numerical Theoretical Measurement Simulation Analysis Research Programming Energy Systems Smart Grids Power Systems Renewables
-
SEASONAL THERMAL STORAGENicolas KellyComputer-Based Modelling Numerical Theoretical Design Simulation Analysis Research Energy Systems Smart Grids Renewables
-
MITIGATING THE IMPACT OF ELECTRIC VEHICLES ON ENERGY NETWORKSNicolas KellyComputer-Based Modelling Numerical Simulation Analysis Programming Electrical Technologies Energy Systems Smart Grids Power Systems Renewables
-
4/5TH GENERATION DISTRICT HEATINGNicolas KellyComputer-Based Modelling Numerical Simulation Analysis Research Energy Systems Power Systems Renewables Data Analysis
-
DESIGN AND ANALYSIS OF INTEGRATED THERMAL STORAGENicolas KellyComputer-Based Modelling Numerical Design Simulation Analysis Research Energy Systems Materials Renewables
-
ALTERNATIVE REFRIGERANT INVESTIGATIONNicolas KellyComputer-Based Modelling Numerical Design Simulation Analysis Research Programming Energy Systems Renewables Systems Engineering Sustainable Systems Clean Energy
-
Thermocapillary motion of two dropletsPaolo CapobianchiMarangoni Flow Microgravity Numerical Simulation OpenFOAM
-
Investigation of the rheological properties of moderately dense ferrofluid emulsionsPaolo CapobianchiFerrofluids Shearing Flow Emulsion Rheology Numerical Simulation OpenFOAM
-
Magnetic field-induced migration of ferrofluid dropletsPaolo CapobianchiFerrofluids Droplet Migration Targeted Drug Delivery Numerical Simulation OpenFOAM
-
Rising bubbles in viscoelastic fluid flowsPaolo CapobianchiThermofluids Numerical Simulations Rheology
-
A Study on the Potential Pathways of Renewable Heating at the University of StrathclydePaul Tuohy
-
How various renewable and storage technologies can alleviate the impact the Isle of Eigg’s new Community Hub will have on its electrical networkPaul Tuohy
-
Investigation Into The Use Of Open Energy Monitoring Systems For Smart Energy Systems Performance MonitoringPaul Tuohy
-
Sustainable Retrofit of Mamores Lodge, KinlochlevenPaul TuohyModelling Analysis Energy Systems Smart Grids Wind Energy Renewables Health and Wellbeing
-
Assessment of the role of storage in future District Scale energy systemsPaul TuohyModelling Design Simulation Analysis Energy Systems Smart Grids Wind Energy Renewables
-
Underground Thermal Storage Integration with Renewable Generation, Electricity Networks and District HeatingPaul TuohyClean Energy Control Energy Systems Modelling Design Analysis
-
Evaluation of solar thermal vs solar PV for domestic applications in UKPaul TuohyClean Energy Energy Systems Modelling Experimental Analysis
-
Enhancement the inherited properties of natural fibres using surface treatmentsReda FelfelMechanical Engineering Optimisation Sustainable Systems Practical Analysis Research
-
Development of fully sustainable fibre-reinforced compositesReda FelfelMechanical Engineering Renewables Sustainable Systems Practical Analysis Research
-
Compression moulding and characterisation of shaped glass fibre-reinforced polypropylene composites for automotive sectorReda FelfelMechanical Engineering Fabrication Materials Practical Experimental Analysis Research
-
Non-linear Finite Element Analysis in Pressure Vessel DesignRobert HamiltonSoftware Modelling Numerical Design Analysis
-
Design of Offshore Pipelines subjected to complex loading using FEA.Robert HamiltonMechanical Engineering Computer-based Modelling Numerical Design Analysis
-
Design for High Cycle Fatigue using Finite Element AnalysisRobert HamiltonComputer-based Design Analysis
-
Development of a Rocker Link for a Mountain Bike Rear Suspension SystemRobert HamiltonComputer-based Modelling Design Analysis
-
Enhancement of composite materials properties via auxetic nanoparticle additionRoss MintyMechanical Engineering Optimisation Practical Experimental Measurement Analysis Research
-
Characterising the effect of intermittent saturation on the performance of composite materialsRoss MintyMechanical Engineering Practical Experimental Measurement Analysis Research Materials Wind Energy
-
An investigation into the effect of gold coating glass fibres on the resultant performance of the fibre-matrix interface of the resulting composite materialRoss MintyMechanical Engineering Practical Experimental Measurement Analysis Research Materials Wind Energy
-
An investigative study into the material properties of fibre-reinforced composite materials exposed to cryogenic dip cycles and then exposed to high temperature cycles.Ross MintyMechanical Engineering Practical Experimental Measurement Analysis Research Materials Aerospace Hydrogen
-
Characterising the role of different surface treatments on the adhesion performance of natural fibres sourced from the MauritiusRoss MintyMechanical Engineering Practical Experimental Measurement Analysis Research Materials Sustainability
-
Characterising the role of different surface treatments on the adhesion performance of natural wool fibres for use in motorsport helmetsRoss MintyMechanical Engineering Practical Experimental Measurement Analysis Research Materials Sustainability Motorsport Automotive
-
An investigation into the fibre-matrix interface of carbon-fibre reinforced composites when exposed repeatedly to electric charge for aerospace applicationsRoss MintyMechanical Engineering Practical Experimental Measurement Analysis Research Materials Aerospace
-
An investigative study into the tensile performance of metallic coated-glass fibre for use in composite structural applicationsRoss MintyMechanical Engineering Practical Experimental Measurement Analysis Research Materials Sustainability Aerospace Automotive
-
Development of laser-perforated composite materials for the aerospace sectorRoss MintyMechanical Engineering Practical Experimental Measurement Analysis Research Materials Aerospace Sustainability
-
Tidal energy for clean water productionStephanie OrdóñezClean Energy Computer-based Design Analysis
-
Designing tidal stream turbinesStephanie OrdóñezRenewables Clean Energy Computer-based Modelling Design Analysis
-
Assessing tidal energy costs based on rotor size and designStephanie OrdóñezComputer-based Design Analysis
-
Assessing the variability of the stream currents and its influence in rotor and power-train loadingStephanie OrdóñezAnalysis Research Programming
-
Evaluating the effects of tidal turbine rotors when subjected to wave-current interactions - SO0001Stephanie OrdóñezEnergy Systems Aerospace Engineering Analysis Computer-Based Design Offshore Renewables
-
evaluating the potential to use floating photovoltaics in the uk - SO0002Stephanie OrdóñezEnergy Systems Thermofluids Engineering Analysis Computer-Based Design Software Offshore Renewable Energy
-
assessing the redundancy of mooring systems for floating wind - SO0003Stephanie OrdóñezEnergy Systems Engineering Analysis Computer-Based Offshore Renewables
-
Giga-Cycle Fatigue Testing of MaterialsTugrul ComlekciMechanical Engineering Aero-Mechanical or Aerospace Materials Modelling Experimental Numerical Measurement Simulation Analysis Research
-
Fracture mechanics analysis of metallic materialsTugrul ComlekciMechanical Engineering Machines Modelling Numerical Design Simulation Analysis Research Materials Experimental Measurement
-
Ground Engaging Tools (GET) DesignTugrul ComlekciMechanical Engineering Machines Modelling Numerical Design Simulation Analysis Research
-
Finite and Discrete Element Methods for Structural AnalysisTugrul ComlekciMachines Mechanical Engineering Modelling Numerical Design Simulation Analysis Research Programming
-
Cold Forming of StructuresTugrul ComlekciMechanical Engineering Aero-Mechanical or Aerospace Materials Modelling Experimental Numerical Measurement Design Simulation Analysis Research
-
Investigation of the compressive residual stress methods for improved fatigue lifeTugrul ComlekciMechanical Engineering Materials Modelling Numerical Design Simulation Analysis Research
-
Art, glass and the art of recycling: the use of eco-glass in the creative glass industryTiziana MarroccoOptimisation Energy Markets Clean Energy Materials Practical Experimental Measurement Analysis Research
-
Wind Turbine Connecting Rod – Materials of Construction and Failure Assessment - TM0001Tiziana MarroccoMaterials CAED-Design Experimental Measurements Modelling Numerical Simulation Theoretical Research Clean Energy Renewables Remanufacturing
-
Wind Turbine Cooling System Assessment – Debris Detection and System Re-qualification - TM0002Tiziana MarroccoMaterials Engineering Analysis Experimental Measurements Modelling Numerical Simulation Theoretical Cost Analysis Research Clean Energy Renewables Failure Investigation
-
Natural wool as an alternative insulation to synthetic solutions - TM0004Tiziana MarroccoMaterials Engineering Analysis Analysis Construction Design Experimental Measurement Theoretical Recycling Waste reduction Sustainability
-
Advanced Simulation Models for CO2 Leakage in Marine SedimentsUmer SaleemCO2 Leakage Simulation Models Marine Sediments Computational Fluid Dynamics Carbon Capture Environmental Science
-
Food protecting Food: Nature’s Way - TM0003Tiziana MarroccoMaterials Analysis Construction Design Experimental Measurement Modelling Numerical Programming Simulation Theoretical Recycling Waste reduction Packaging materials Plastic alternative Sustainability
-
Innovative Methods for Mitigating CO2 Emissions from Subsurface LeaksUmer SaleemCO2Emissions Leak Mitigation Subsurface Leaks Advanced Materials CCS Experimental Research
-
Optimization of CO2 Injection Strategies Using Real-Time Simulation ToolsUmer SaleemCO2 Injection Real Time Simulation Injection Strategies Adaptive Models Carbon Capture Leak Prevention
-
Evaluation of CO2 Storage Safety Using Integrated Experimental and Simulation ApproachesUmer SaleemCO2 Storage Safety Evaluation Experimental Approach Simulation Techniques Long Term Behavior Risk Assessment
-
Integration of Machine Learning with CO2 Leakage Simulation for Enhanced Predictive CapabilitiesUmer SaleemMachine Learning CO2 Leakage Simulation Models Predictive Capabilities Data Analysis Response Strategies
-
Development of a supersonic cleaning nozzleWilliam DempsterDesign Analysis Energy Systems
-
Analysis of flowmeter performance using CFD techniquesWilliam DempsterModelling Design Analysis Energy Systems
-
Modelling studies of a blowdown assist safety valveWilliam DempsterModelling Design
-
Hydraulic design of Y junctions for minimum pressure lossWilliam DempsterModelling Design Simulation
-
An investigation of the impact of large particles on materialsWilliam DempsterPractical Experimental
-
Investigation of Compressed Air Energy Storage Systems - WD0001William DempsterThermofluids Modelling Design Computer-Based Hydraulic Systems
-
Investigation of accumulator response in hydraulic system - WD0002William DempsterThermofluids Modelling Design Computer-Based Storage Systems
-
Transient clearing of contaminants in geological storage reservoirs - WD0003William DempsterThermofluids Modelling Computer-Based Analysis Net Zero
-
Simulation of fatigue crack propagation using SMART crack growth techniqueYevgen GorashMechanical Engineering Materials Computer-based Numerical Theoretical Simulation Analysis
-
Simulation of residual stresses in Additive Manufacturing processYevgen GorashMechanical Engineering Materials Computer-based Modelling Numerical Simulation Analysis
-
Study on the effect of weld defects on fatigue life of structuresYevgen GorashMechanical Engineering Materials Computer-based Modelling Numerical Simulation Analysis Research
-
Automating design of parametric components using SolidWorks Application Programming InterfaceYevgen GorashMechanical Engineering Computer Science Software Computer-based Modelling Numerical Programming
-
Using Cycle Jump Method for the assessment of fretting fatigue damageYevgen GorashMechanical Engineering Machines Computer Science Materials Industrial internship Computer-based Numerical Design Simulation Analysis Research Programming Dissertation
-
Using Cycle Jump Method for the simulation of shakedown and ratchetingYevgen GorashMechanical Engineering Mechatronics Automation Machines Computer Science Materials Software Computer-based Modelling Numerical Design Simulation Analysis Research Programming Dissertation
-
Simulation of surface wear using Finite Element Analysis for components contactYevgen GorashMechanical Engineering Mechatronics Optimisation Automation Machines Computer Science Materials Sports Engineering Industrial internship Computer-based Modelling Numerical Design Simulation Analysis Research Programming Dissertation
-
Numerical simulation of thin sheet metal parts manufacturing process using metal formingYevgen GorashMechanical Engineering Materials Computer-based Numerical Theoretical Simulation Analysis
-
Development of parametric simulation applications using Ansys PyMAPDL and Python programmingYevgen GorashMechanical Engineering Computer Science Software Computer-based Modelling Numerical Programming Python