Development of parametric simulation applications using Ansys PyMAPDL and Python programming

Simulation of surface wear using Finite Element Analysis for components contact

Using Cycle Jump Method for the simulation of shakedown and ratcheting

Automating design of parametric components using SolidWorks Application Programming Interface

Study on the effect of weld defects on fatigue life of structures

Simulation of residual stresses in Additive Manufacturing process

Transient clearing of contaminants in geological storage reservoirs - WD0003

Investigation of accumulator response in hydraulic system - WD0002

Investigation of Compressed Air Energy Storage Systems - WD0001

Hydraulic design of Y junctions for minimum pressure loss

Modelling studies of a blowdown assist safety valve

Analysis of flowmeter performance using CFD techniques

Food protecting Food: Nature’s Way - TM0003

Wind Turbine Cooling System Assessment – Debris Detection and System Re-qualification - TM0002

Wind Turbine Connecting Rod – Materials of Construction and Failure Assessment - TM0001

Investigation of the compressive residual stress methods for improved fatigue life

Cold Forming of Structures

Finite and Discrete Element Methods for Structural Analysis

Ground Engaging Tools (GET) Design

Fracture mechanics analysis of metallic materials

Giga-Cycle Fatigue Testing of Materials

Designing tidal stream turbines

Development of a Rocker Link for a Mountain Bike Rear Suspension System

Design of Offshore Pipelines subjected to complex loading using FEA.

Non-linear Finite Element Analysis in Pressure Vessel Design

Evaluation of solar thermal vs solar PV for domestic applications in UK

Underground Thermal Storage Integration with Renewable Generation, Electricity Networks and District Heating

Assessment of the role of storage in future District Scale energy systems

Sustainable Retrofit of Mamores Lodge, Kinlochleven

ALTERNATIVE REFRIGERANT INVESTIGATION

DESIGN AND ANALYSIS OF INTEGRATED THERMAL STORAGE

4/5TH GENERATION DISTRICT HEATING

MITIGATING THE IMPACT OF ELECTRIC VEHICLES ON ENERGY NETWORKS

SEASONAL THERMAL STORAGE

HIGH RESOLUTION SOLAR RADIATION DATA

REDUCING HEATING AND AIR CONDITIONING LOADS IN ELECTRIC VEHICLES

Assessing the impact of degradation on the energy resilience of buildings - NK0001

Eco-design of Complex Engineering Systems

Satellite Digital Twin

Evidence-based Systems Engineering

Re-entry Detector as Secondary Paylod for STRATHcube - MV0003

Development of a geospatial model to predict damage on wind turbine blades

Creating a probability model for the prediction of the number of impacts by raindrops and or hail

Bio-tribo-corrosion mapping of artificial joints

CFD modelling of the erosion-corrosion of steel

Numerical simulation of shear-thinning fluid flows through convergent-divergent geometries

Numerical characterisation of extensional flow trough a microfluidic cross-slot device

Fluid-solid particle mixtures in vibrated shallow enclosures in normal gravity conditions. - ML0006

Fluid-solid particle mixtures in corner heated cubic cavities in microgravity conditions. - ML0005

Fluid-particle systems encapsulated in triangular, tetrahedral and octahedral cavities in microgravity - ML0004

Experimental Investigation of the Dynamic Response of Lunar Regolith Simulants to Horizontal Vibrations - ML0003

Experimental Investigation of the Dynamic Response of Lunar Regolith Simulants to Vertical Vibrations in a 3D Container - ML0002

Experimental Investigation of the Response of Lunar Regolith Simulants of Different Particle Size Distributions to Vertical Vibrations - ML0001

Simulation of the fluid-structure interaction of a high-aspect ratio wing in transonic regimes

Characterisation of nonequilibrium shock interference patterns transition over canonical shapes

Spatio-temporal identification and collocation of vortex breakdown using Reduced Basis Methods

Numerical study of laminar and turbulent gas-surface aerodynamic interaction using anisotropic mesh adaptation

Design investigation to hybridise the most optimal characteristics of the Triumph and Honda parallel twin motorcycle engines.

Numerical study of the aerodynamic performance of martian aerobots

Analysis of staged space tethers for performance optimisation.

Analysis and design of a controllable suspension for vibration isolation, with extended negative to positive stiffness characteristics.

Design of a highly controllable vibration isolator for precision instrumentation.

Addessing the potential hazardous impact of small solar system bodies with Earth

Addessing the potential hazardous impact of small solar system bodies with Earth

Coverage analysis of Low Earth Orbit Starlink Constellations

Autonomous orbit determination for spacecraft orbiting an asteroid

Trajectory design and analysis for an asteroid lander

Resonance capture and escape of a low-thrust spacecraft around asteroids

AI-based Multi-sensor Data Fusion for Space Navigation - JF0001

Design and prototyping of an electric autonomous rover for transportation in agricultural steep terrain

Design and construction of drone based system for the treatment of pine/oak processionary pest

Design of a small scale free piston Stirling engine solar concentration system

Design of a Smart Home Composter

The use of free satellite data for the management and development of forests in Scotland

Remote sensing for precision agriculture

Intelligent Control for Access to Space

Symbolic regression via genetic programming

Atmospheric Water Harvesting: Low-Cost Solutions for Arid Zones

CFD based optimisation of 2D shapes.

Effect of the solid surface topology on minimising the slip of soft gels

Low fidelity models for aerodynamic and aeroacoustic performance prediction of aeronautical propellers

Finite Element Analysis of 'Hot Bolting' of Pressure Vessel Flanged Joints

Finite Element Optimisation of a Bioresorbable Stent Graft for use in Lower Limb Peripheral Arterial Disease (PAD) Prevention

Crack Defect Tolerance in High Pressure Piping Components

Elastic-Plastic Buckling of Externally Pressurised Cylinders in Forming Processes

Assessment of Stress Linearization procedures for Pressure Vessel Design by Analysis

Design by Analysis of a Pressure Vessel Nozzle under combined Pressure and Thermal Loading

Elastic-Plastic Finite Element Analysis for Level 3 Fitness for Service assessment

Investigating the critical crack length of a structural component from a helicopter using advanced fracture tools in ANSYS Workbench

A Finite Element Analysis and Fracture Mechanics Study of the Damage Tolerant Capacity of a Flawed Aircraft Fuselage Subject to Internal Pressurisation

Critical Analysis of the Challenger Space Shuttle Disaster

Assessment of Global and Local Ductile Failure in Pressure Vessel Design

Finite Element Analysis for Level 3 Fitness for Service Assessment using Elastic Perfect-Plastic, Elastic Bilinear-Plastic, and Multilinear-Plastic material models

Sizing and selection of hydrualic actuators for industrial manipulators

Development of a tunable PID controller and 2-link manipulator arm

Transient thermal model of a vehicle's cabin

Direct evaporative cooling in building components

Non-intrusive evaluation of thermal properties in existing buildings

Machine learning for aerodynamic surrogate modelling

Uncertainty quantification of global static atmospheric models

Cooling in dry climates using downdraught cooling towers

Visualisation tool for launch vehicle trajectory optimisation

Dynamic modelling and control of a launch system

Low and Zero Emission Vehicles (L-ZEVs)

Tidal energy architecture and influence on power extraction

Development of Python Code to quantify macrozones in titanium compressor disc alloy Ti834 using electron back scattered data

Development of Finite Element Model for open die forging in the Futureforge facility

Residual stress and microstructure characterisation of dissimilar titanium Rotary Friction Welding (RFW) welds

Rotary Friction Welding (RFW) modelling – control of internal flash formation in steel tubes

Can UK manufacturing go net-zero? CFD modelling of hydrogen fired furnaces for metals manufacturing

Development of Finite Element Model for isothermal forging in the Futureforge facility

Development of Finite Element Model for closed die forging in the Futureforge facility

Computational analysis of the friction stir welding process

Modelling of dissimilar material Friction Stir Spot Welding