Numerical simulation of thin sheet metal parts manufacturing process using metal forming

Simulation of surface wear using Finite Element Analysis for components contact

Using Cycle Jump Method for the simulation of shakedown and ratcheting

Using Cycle Jump Method for the assessment of fretting fatigue damage

Study on the effect of weld defects on fatigue life of structures

Simulation of residual stresses in Additive Manufacturing process

Simulation of fatigue crack propagation using SMART crack growth technique

Transient clearing of contaminants in geological storage reservoirs - WD0003

Analysis of flowmeter performance using CFD techniques

Development of a supersonic cleaning nozzle

Food protecting Food: Nature’s Way - TM0003

Natural wool as an alternative insulation to synthetic solutions - TM0004

Art, glass and the art of recycling: the use of eco-glass in the creative glass industry

Investigation of the compressive residual stress methods for improved fatigue life

Cold Forming of Structures

Finite and Discrete Element Methods for Structural Analysis

Ground Engaging Tools (GET) Design

Fracture mechanics analysis of metallic materials

Giga-Cycle Fatigue Testing of Materials

Assessing the variability of the stream currents and its influence in rotor and power-train loading

Assessing tidal energy costs based on rotor size and design

Designing tidal stream turbines

Tidal energy for clean water production

Development of laser-perforated composite materials for the aerospace sector

An investigative study into the tensile performance of metallic coated-glass fibre for use in composite structural applications

An investigation into the fibre-matrix interface of carbon-fibre reinforced composites when exposed repeatedly to electric charge for aerospace applications

Characterising the role of different surface treatments on the adhesion performance of natural wool fibres for use in motorsport helmets

Characterising the role of different surface treatments on the adhesion performance of natural fibres sourced from the Mauritius

An investigative study into the material properties of fibre-reinforced composite materials exposed to cryogenic dip cycles and then exposed to high temperature cycles.

An investigation into the effect of gold coating glass fibres on the resultant performance of the fibre-matrix interface of the resulting composite material

Characterising the effect of intermittent saturation on the performance of composite materials

Enhancement of composite materials properties via auxetic nanoparticle addition

Development of a Rocker Link for a Mountain Bike Rear Suspension System

Design for High Cycle Fatigue using Finite Element Analysis

Design of Offshore Pipelines subjected to complex loading using FEA.

Non-linear Finite Element Analysis in Pressure Vessel Design

Compression moulding and characterisation of shaped glass fibre-reinforced polypropylene composites for automotive sector

Development of fully sustainable fibre-reinforced composites

Enhancement the inherited properties of natural fibres using surface treatments

Evaluation of solar thermal vs solar PV for domestic applications in UK

Underground Thermal Storage Integration with Renewable Generation, Electricity Networks and District Heating

Assessment of the role of storage in future District Scale energy systems

Sustainable Retrofit of Mamores Lodge, Kinlochleven

ALTERNATIVE REFRIGERANT INVESTIGATION

DESIGN AND ANALYSIS OF INTEGRATED THERMAL STORAGE

4/5TH GENERATION DISTRICT HEATING

MITIGATING THE IMPACT OF ELECTRIC VEHICLES ON ENERGY NETWORKS

SEASONAL THERMAL STORAGE

HIGH RESOLUTION SOLAR RADIATION DATA

REDUCING HEATING AND AIR CONDITIONING LOADS IN ELECTRIC VEHICLES

Assessing the impact of degradation on the energy resilience of buildings - NK0001

Eco-design of Complex Engineering Systems

Satellite Digital Twin

Mars Robotic Survey

NEOCORE - a new concept of asteroid exploration

Re-entry Analysis of STRATHcube

Numerical simulation of shear-thinning fluid flows through convergent-divergent geometries

Numerical simulation of flow through a microfluidic flow focusing device for microfibre manufacture

Numerical characterisation of extensional flow trough a microfluidic cross-slot device

Characterisation of slurries of lunar/martian regolith simulants for potential space applications as concrete-like materials - MO0001

Fluid-solid particle mixtures in vibrated shallow enclosures in normal gravity conditions. - ML0006

Fluid-solid particle mixtures in corner heated cubic cavities in microgravity conditions. - ML0005

Fluid-particle systems encapsulated in triangular, tetrahedral and octahedral cavities in microgravity - ML0004

Experimental Investigation of the Dynamic Response of Lunar Regolith Simulants to Horizontal Vibrations - ML0003

Experimental Investigation of the Dynamic Response of Lunar Regolith Simulants to Vertical Vibrations in a 3D Container - ML0002

Experimental Investigation of the Response of Lunar Regolith Simulants of Different Particle Size Distributions to Vertical Vibrations - ML0001

Simulation of the fluid-structure interaction of a high-aspect ratio wing in transonic regimes

Characterisation of nonequilibrium shock interference patterns transition over canonical shapes

Spatio-temporal identification and collocation of vortex breakdown using Reduced Basis Methods

Numerical study of laminar and turbulent gas-surface aerodynamic interaction using anisotropic mesh adaptation

Design investigation to hybridise the most optimal characteristics of the Triumph and Honda parallel twin motorcycle engines.

Numerical study of the aerodynamic performance of martian aerobots

Analysis of staged space tethers for performance optimisation.

Analysis and design of a controllable suspension for vibration isolation, with extended negative to positive stiffness characteristics.

Design of a highly controllable vibration isolator for precision instrumentation.

Addessing the potential hazardous impact of small solar system bodies with Earth

Addessing the potential hazardous impact of small solar system bodies with Earth

Coverage analysis of Low Earth Orbit Starlink Constellations

Survey of Artifical Intelligence (AI) to assist space mission design to small bodies

Autonomous orbit determination for spacecraft orbiting an asteroid

Trajectory design and analysis for an asteroid lander

Resonance capture and escape of a low-thrust spacecraft around asteroids

AI-based Multi-sensor Data Fusion for Space Navigation - JF0001

Battery recycling – developing solutions for the recovery of minerals and materials of construction

A mechanical alternative to grout for offshore wind turbine foundations

Investigation of the Residual Stress and Microstructure of Wire Plus Arc Additive Manufactured Components Using F22 Steel

Effect of Notch Machining on Fracture Toughness of Steel

Fracture Toughness Assessment of Advanced Engineering Alloys for Industrial Application

Design and construction of drone based system for the treatment of pine/oak processionary pest

Design of a small scale free piston Stirling engine solar concentration system

Design of a Smart Home Composter

The use of free satellite data for the management and development of forests in Scotland

Remote sensing for precision agriculture

Intelligent Control for Access to Space

Symbolic regression via genetic programming

Atmospheric Water Harvesting: Low-Cost Solutions for Arid Zones

Symbolic regression for engineering design

Low fidelity models for aerodynamic and aeroacoustic performance prediction of aeronautical propellers

Mechanics of tailings pond management: computational fluid dynamics & plasticity theories

Finite Element Analysis of 'Hot Bolting' of Pressure Vessel Flanged Joints

Finite Element Optimisation of a Bioresorbable Stent Graft for use in Lower Limb Peripheral Arterial Disease (PAD) Prevention

Crack Defect Tolerance in High Pressure Piping Components

Elastic-Plastic Buckling of Externally Pressurised Cylinders in Forming Processes

Assessment of Stress Linearization procedures for Pressure Vessel Design by Analysis

Design by Analysis of a Pressure Vessel Nozzle under combined Pressure and Thermal Loading

Elastic-Plastic Finite Element Analysis for Level 3 Fitness for Service assessment

Investigating the critical crack length of a structural component from a helicopter using advanced fracture tools in ANSYS Workbench

A Finite Element Analysis and Fracture Mechanics Study of the Damage Tolerant Capacity of a Flawed Aircraft Fuselage Subject to Internal Pressurisation

Critical Analysis of the Challenger Space Shuttle Disaster

Assessment of Global and Local Ductile Failure in Pressure Vessel Design

Finite Element Analysis for Level 3 Fitness for Service Assessment using Elastic Perfect-Plastic, Elastic Bilinear-Plastic, and Multilinear-Plastic material models

Transient thermal model of a vehicle's cabin

Non-intrusive evaluation of thermal properties in existing buildings

Heat and mass transfer between human body and environment

Machine learning for aerodynamic surrogate modelling

Uncertainty quantification of global static atmospheric models

Dynamic modelling and control of a launch system

Low and Zero Emission Vehicles (L-ZEVs)

Hybrid Automotive Drive-trains

Tidal energy architecture and influence on power extraction

An Investigation of The Effect of Core Thickness on The Flexural Stiffness of Foam Core Sandwich Plates

Investigating the Flexural Rigidity contribution of Carbon Fibre Sandwich Cores

Residual stress and microstructure characterisation of dissimilar titanium Rotary Friction Welding (RFW) welds

Data Management for the Operation of Digital Twins

Rotary Friction Welding (RFW) modelling – control of internal flash formation in steel tubes

Microstructure Analysis of Advanced Aerospace Titanium Alloys

An investigation of friction stir welding, friction stir processing and related technologies

Computational analysis of the friction stir welding process

Modelling of dissimilar material Friction Stir Spot Welding

Satellite Data for Sustainable Development

Assessment of the effect of damage on the strength of climbing carabiners

An audit on DStan using the BS202000- Standardisation Management System Standard

A Comparative Assessment of a UK Defence Standard and NATO STANAG regarding the Fording and Flotation of Military Vehicles

Development Of An Evidence-Based Procedure For Calibrating 3D Scanners For Measuring Back Face Deformation Of Body Armour And Calculation Of The Associated Measurement Uncertainty

Identifying acceptance criteria within NDT Defence Standards for implementation within relevant BS EN ISO standards

Defence Standardisation: Project sponsored by the Ministry of Defence (MOD)